Shop headings: New Spares | Used Spares | Accessories | Brands
Pad pin kit for Brembo P2 F08 (P8) calipers, consists of two long pins, one short and retaining spring.
replaces old Guzzi part ref. 14659100. Brembo ref. 120274210. NB finish on long pins may be zinc or black
This part is due back in stock soon, call 01484 841395 to reserve yours
14659100 GU14659100 14 65 91 00
1465 9100 1465.9100 14.65.91.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.85
INC VAT
£16.54 EX VAT
Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes
Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin
This part is due back in stock soon, call 01484 841395 to reserve yours
95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65
£11.76
INC VAT
£9.80 EX VAT
70mm spring used as retaining spring for airbox and rear master cylinder return spring. Application varies by model
Two required for airbox. Some models use 50mm spring BRA17651 for master cylinder - we recommend measuring yours before ordering
This part is due back in stock soon, call 01484 841395 to reserve yours
17667650 GU17667650 17 66 76 50
1766 7650 1766.7650 17.66.76.50
£4.40
INC VAT
£3.67 EX VAT
Brake Hose Support Rubber
Wraps around hose and slots into bracket
Sorry, this part is no longer available.
17658260 GU17658260 17 65 82 60
1765 8260 1765.8260 17.65.82.60
Sorry this item is out of production
Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR
£32.50
INC VAT
£27.08 EX VAT
Brembo type PS 15 handlebar mounted front master cylinder with plastic reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Use brake lever BRA14605 or BRA17606 for this master cylinder. See BRA30125 for replacement part
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 350 Vento/Forza (1977-1985), Ducati 450 Desmo, Laverda, Hesketh
£143.00
INC VAT
£119.17 EX VAT
Rear brake pedal operating rod, connects to lever on master cylinder. Supplied without clevis fork or adjuster nut
Brake rod
This part is available by special order, request a quote
£32.00
INC VAT
£26.67 EX VAT
Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30
£32.50
INC VAT
£27.08 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT